Wall mounting steel document holders and storage baskets for commercial and domestic use. UK designed and manufactured. Available in powder coated grey, red and blue. Available in steel and stainless steel.
-
Part No: DH-V
Internal size: 240 x 259mm (WxH) (Depth tapers from 60mm to 50mm at bottom.. Powder coated grey.
-
Part No: DH-H
Internal size: 320 x 180mm (WxH) (Depth tapers from 40mm to 30mm at bottom.. Powder coated grey. Ideal for our extra heavy duty racking
-
Part No: ZB1-BLUE
Internal size: 240 x 259mm (WxH) (Depth tapers from 60mm to 50mm at bottom. Powder coated blue.
-
Part No: ZB2-BLUE
Internal size: 340 x 259mm (WxH) (Depth tapers from 110mm to 100mm at bottom. Powder coated blue.
-
Part No: ZB1-RED
Internal size: 240 x 259mm (WxH) (Depth tapers from 60mm to 50mm at bottom. Powder coated red.
-
Part No: ZB2-RED
Internal size: 340 x 259mm (WxH) (Depth tapers from 110mm to 100mm at bottom.. Powder coated red.
-
Part No: SS-B1
Internal size: 240 x 259mm (WxH) (Depth tapers from 60mm to 50mm at bottom.Stainless steel.
-
Part No: SS-B2
Internal size: 340 x 259mm (WxH) (Depth tapers from 110mm to 100mm at bottom. Stainless steel.
-
Part No: SB-001
Internal size: 320 x 244mm (WxH) (Depth tapers from 120mm to 100mm at bottom.. Powder coated grey.
-
Part No: SB-002
Internal size: 650 x 244mm (WxH) (Depth tapers from 120mm to 100mm at bottom. Powder coated grey. Not suitable for our van racking
-
Part No: SGH-1
Size: 382L x196 H x 100D (Top Opening Hole = 62mm Diameter) 1.2mm Quality Steel - Powder-Coat silver painted 62mm diameter opening Useful extra holes to accept screw drivers Accepts...
-
Part No: STH-1
Size: 398L x 159H x 152D (Top Opening Holes = 55mm Diameter) ** NOT SUITABLE FOR HOLDING MASTIC GUNS ***** Part No. SGH-1 required *** 1.2mm Zintec Steel - Powder-Coat silver...
-
Part No: MPH-1
Size: 398L x 190H x 155D (Top Opening Holes = 80mm & 70mm Diameter) 1.2mm Zintec Steel - Powder-Coat silver painted 80mm & 70mm diameter opening for blow torch, paint tins...
-
Part No: TT-1
3mm Zintec Steel - Powder-Coat Black painted Ideal for fitting to most flat surfaces Van Racking, Workshop, Store & Garage Please Note; FIXINGS NOT SUPPLIED. Manufactured completely in the UK...
-
Part No: TT270
3mm Zintec Steel - Powder-Coat Black painted Ideal for fitting to most flat surfaces Van Racking, Workshop, Store & Garage Please Note; FIXINGS NOT SUPPLIED. Manufactured completely in the UK...
-
Part No: TT270-TWINPACK
3mm Zintec Steel - Powder-Coat Black painted Ideal for fitting to most flat surfaces Van Racking, Workshop, Store & Garage Please Note; FIXINGS NOT SUPPLIED. Manufactured completely in the UK...
-
Part No: PTH-1-GREY
StoreTidy™ Paper Towel / Roll Dispenser. Bespoke design ideal for Van, Workshop, Tool Box.Specification:Made from 1.5mm Zintec (pre-zinc coated steel). Polyester coated - Textured black housing with semi-gloss painted Brake-Flap.Accepts roll sizes...
-
Part No: GBH-1
StoreTidy™ hygiene glove box holder. Latex glove box holder / dispenser. Also ideal for tissue boxes.Van Racking, Workshop, Store & Garage Please Note; FIXINGS NOT SUPPLIED.Fits perfectly to our extra...
