Our van racking is made of tough steel
It will outlast your van.

Powder coated red and textured black side panels. Sloping tool case and a simple low profile shelf in a satin galvanised finish.

1.0m steel shelves and 1.5mm steel sides. Folded front and back edges for extra strength. Removable dividers.

Low profile plain galvanised, sloping tool case shelf, deep metal trays with dividers.

Full fixings and van mounting brackets included.. Each shelf is bolted in with M6 bolts and captive nuts. You can set the shelves at different heights to suit your tool kit. Assembly time 20-30 minutes per rack.

Powder coated grey and textured black side panels. Sloping tool case shelf in a satin galvanised finish.

1.0m steel shelves and 1.5mm steel sides. Folded front and back edges for extra strength. Deep shelfs have enclosed ends and welded on the corners. Removable dividers.

100mm deep metal trays with dividers, sloping tool case shelves and grey low profile shelves with XL3 plastic bins

The standard base units are suitable standard H1 roof heights on medium size vans. However for larger vans or H2/H3 variants extension tops can be added to go higher.

Full fixings and van mounting brackets included.. Each shelf is bolted in with M6 bolts and captive nuts. You can set the shelves at different heights to suit your tool kit. Assembly time 20-30 minutes per rack.

Powder coated grey and textured black side panels. Sloping tool case shelf in a satin galvanised finish.

1.2m steel shelves and 1.5mm steel sides. Folded front and back edges for extra strength. Deep shelves have enclosed ends and welded on the corners. Removable dividers.

100mm deep metal trays with dividers, galvanised sloping tool case shelves and low profile galvanised shelves with XL4 parts bins.

The standard base units are suitable standard H1 roof heights on medium size vans. However for larger vans or H2/H3 variants extension tops can be added to go higher.

Full fixings and van mounting brackets included.. Each shelf is bolted in with M6 bolts and captive nuts. You can set the shelves at different heights to suit your tool kit. Assembly time 20-30 minutes per rack.

Powder coated paint and and textured black side panels. Matt galvanised shelves and supports.

1.2m steel drawer & shelves and 1.5mm steel sides. Our unique design uses an affordable and robust design that will not fail. The drawers run on low friction metal glides so there are no moving parts to fail. There is a lock stop so the drawers will not fly open. 3mm rubber matting included.

These are supplied with a quality 15mm birch plywood worktop and a hard wearing phenolic coating. There are sturdy metal braces to support the workbench. Different shelf options to go underneath.

Full fixings and van mounting brackets included.. Bolted together with M6 bolts, coach bolts and captive nuts.